For US contractors & small businesses

Payroll, crews and job costing.
One flat price.

Federal and state payroll for all 50 states and DC, crew scheduling and timesheets, job costing with labor burden, and invoices with your state's sales tax. Built for trades crews of 2 to 25 and the service businesses that work like them. Every crew seat is free. Try it free, no credit card.

  • All 50 states + DC
  • Flat price, crew seats free
  • Built by a carpenter
  • No credit card to start
1
Pick your state
Setup asks for your country first, then your state. Choose United States and the app switches to USD, US payroll and your state's sales tax.
2
Add your crew and jobs
Add employees with their W-4 and state certificate, your subcontractors, customers and the jobs you're running.
3
Run the week
Crew clocks in, hours hit the job, payroll runs off the approved hours, and the invoice goes out with the right tax.

Payroll math for every state, without the per-employee fee

The withholding comes from the IRS and state publications, not a guess. State formulas were checked against 130 official worked examples published by the states themselves.

Federal income tax
Withholding from the 2020-and-later Form W-4, using the IRS Publication 15-T method for 2026.
State withholding, all 50 + DC
Each state's own withholding certificate and formula, not a flat percentage. States with no income tax are handled too.
Social Security, Medicare, FUTA
Employee and employer Social Security and Medicare, including Additional Medicare over the threshold. FUTA, including the credit reduction for affected states.
State programs
California SDI, New York PFL and DBL, Washington PFML and WA Cares, and the New Jersey, Rhode Island, Massachusetts and Oregon programs.
941, 940 and W-2 figures
Form 941, Form 940 and W-2 figures exported as CSV, ready for you or your accountant. IRS deposit due dates for monthly depositors, so the deadline doesn't sneak up.
1099-NEC subcontractors
Track what you pay each sub and see who crosses the 1099-NEC threshold: $2,000 for payments made in 2026.

The hours your crew logs become the invoice you send

Most crews run a time clock, a spreadsheet for job costs and something else for invoices, and nobody retypes the numbers right. Here it's one chain.

Crew scheduling
Put people on jobs on a week board. Publish it and each worker sees their own week on their phone.
Timesheets & clock-in
The crew clocks in from their phone browser with the free Work Suite. You approve, and the hours feed payroll and job costing with no re-entry.
Daily reports
Who was on site, what got done, weather, materials and photos, filed from the job in a few minutes.
Job costing with labor burden
Set your labor burden rate (payroll taxes, workers' comp, overhead) and each job's labor shows what the hours really cost you, next to materials and expenses, so you see the real margin.
Invoices & estimates
Your state's sales tax rate plus the local rate you enter. Tax-exempt customers keep their certificate number on file. USD by default, sent as a PDF.
Expenses & receipts
Snap the receipt and file it under a Schedule C category. Sales tax you paid is counted in the cost, the way it works in the US.
Mileage at the IRS rate
Each trip uses the IRS rate for its date: 72.5¢ a mile January to June 2026, 76¢ from July 1, 2026.

Know what you'll owe before April, not in April

The Taxes page works from the numbers you already logged all year.

Owner estimate
Self-employment tax and QBI, by filing status.
An estimate of what you'll owe as the owner, with self-employment tax and the qualified business income deduction worked in, plus your Form 1040-ES quarterly due dates.
Trucks & equipment
Section 179, bonus and MACRS.
Add the truck, the trailer or the saw and see Section 179, bonus depreciation and MACRS worked out the way Form 4562 lays them out.
Reports
Profit & loss, cash or accrual.
A real P&L built from your invoices and expenses, on a cash or accrual basis, exported as CSV or printed for whoever does your return.

We calculate and track. You file and pay.

ToolFluency isn't a payroll service that moves money or files for you. It does the math and keeps the records so filing is quick.

What it does
  • Calculates federal and state withholding, Social Security, Medicare and FUTA on every pay run
  • Gives you W-2, 941 and 940 figures as CSV and your IRS deposit due dates
  • Tracks 1099-NEC payments to subcontractors
  • Estimates your owner taxes and depreciation for planning
What it doesn't do
  • File tax returns or forms for you, or e-file W-2s
  • Pay your employees or run direct deposit
  • Calculate local city or county income taxes (Pennsylvania, Ohio, Michigan and others are flagged so you know to handle them)
  • Split one employee's pay across several states. Each employee has one work state.

Estimates are for planning. The formulas follow the IRS and state publications, but the app isn't reviewed by an accountant, so check the numbers before you file.

Built by a carpenter who has run his own crew

ToolFluency is built by one person: a Red Seal carpenter (Canada's top trade certification) who has run his own crew, so the app is built around how crews actually log hours, cost jobs and bill. It started in Canada and now does the US side properly too. If you email about a bug, the person who built it reads it.

Trades & construction
From "on site at 7" to "customer got billed."
Framers, remodelers, drywall, roofing, electrical, plumbing and painting crews. Hours land on the job, materials get logged, payroll runs off the same hours, and the invoice fills from the job.
Field service
Route all day, bill from the truck.
HVAC, appliance repair, mobile mechanics, pest control and handyman outfits. Each stop is a job with its own hours and parts, costed by the end of the week.
Property & grounds
Seasonal crews, one clean set of numbers.
Landscaping, lawn care, snow removal, cleaning and pool service. Seasonal workers get a free seat, hours roll into payroll, and recurring customers get billed off the work that was done.

One flat price. No per-employee fees.

Prices are in US dollars for businesses in the United States. No currency conversion on your card.

Business
$16
USD/month · or $13/mo billed annually
✓Invoices & estimates with your state sales tax
✓Expenses & receipt capture
✓Customer management
✓Mileage & vehicle tracking
✓Sales tax & income tax reports
✓Free trial: 10 invoices sent or reports, within 30 days
Try Business Free

No credit card to start. Estimates, setup and adding your crew never count toward the trial. 30-day money-back guarantee on paid plans. Full pricing

Common questions

Does it calculate payroll for my state?
Yes, for all 50 states and DC. Federal income tax withholding follows the 2020-and-later Form W-4 and IRS Publication 15-T (2026). Each state uses its own withholding certificate and formula, and the state formulas were checked against 130 official worked examples published by the states. Social Security, Medicare (including Additional Medicare), FUTA (including credit reduction) and state programs such as California SDI, New York PFL and DBL, Washington PFML and WA Cares, plus the New Jersey, Rhode Island, Massachusetts and Oregon programs, are calculated too. Local city and county income taxes (Pennsylvania, Ohio, Michigan and others) are flagged, not calculated.
Does ToolFluency file my taxes or pay my employees?
No. ToolFluency calculates and tracks; you file and pay. It does not file tax returns or forms for you, does not pay employees or run direct deposit, and does not e-file W-2s. It gives you the W-2, Form 941 and Form 940 figures as CSV and shows your IRS deposit due dates (monthly depositor) so you or your accountant can file and pay on time.
Can I rely on the numbers?
Use them for planning and record-keeping, and check them before you file. The federal and state formulas were built from the IRS and state publications and tested against the official worked examples, but ToolFluency is not reviewed or verified by an accountant or CPA. Owner tax estimates are estimates. If something looks off, your tax professional has the final word.
Are the prices in US dollars?
Yes. A business set up in the United States is charged in USD, so a US card has no currency conversion. ToolFluency is built in Canada; Canadian accounts pay the same numbers in Canadian dollars.
How do I set it up for a US business?
Setup asks for your country first, then your state. Pick United States and your state, and the app switches to US dollars, US payroll and your state's sales tax rate. You add your local sales tax rate yourself, since it depends on where you work.
Does it track 1099 subcontractors?
Yes. It tracks what you pay each subcontractor and flags who crosses the 1099-NEC threshold, which is $2,000 for payments made in 2026. File what you pay subs under the Subcontractors expense category and the Taxes page lists who needs a 1099-NEC, with a CSV. It does not file the 1099s for you.

Put the whole crew on one flat plan

Payroll for your state, timesheets, job costing and invoicing that feed each other. Every crew seat free. Try it free, no credit card, cancel anytime.

Try Business Free
See plans Try Business Free