Treatment Room & Equipment Sanitation: the full procedure
The treatment table, face cradle, bolsters, surfaces, and high-touch points are cleaned then disinfected between every client, and the room is tidied and restocked.
- Applies to: Massage therapists & spa technicians.
- Frequency: Between every client, plus a full close-down at end of day.
- Scope: Covers cleaning and disinfecting the table, face cradle, bolsters, hard surfaces, and high-touch points, then restocking. The required disinfectant and contact time defer to the product label and state board.
What you need
- EPA-registered hospital-grade disinfectant
- Clean cloths / paper towels
- Gloves
- Restock supplies
- Waste / laundry bins
The procedure, step by step
- Glove & ventilate — Put on gloves and open the door or run ventilation before applying disinfectant.
- Clean first — Wipe oil, lotion, and debris off the table, cradle, and bolsters, because cleaning must precede disinfecting to be effective.
- Disinfect the table — Apply an EPA-registered hospital-grade disinfectant to the table, face cradle, and bolsters and keep surfaces wet for the full label contact time.
- Hit high-touch points — Disinfect doorknobs, light switches, the stool, side tables, hooks, and any surface the client or therapist touched.
- Do floors & spills — Clean any product spills or drips on the floor and surrounding surfaces.
- Restock supplies — Refill oils, lotions, water, tissues, and single-use items so the next session starts fully stocked.
- Reset the room — Make the table with fresh linens (per the linen SOP), straighten furniture, and remove all waste and used laundry.
- Final scan — Visually confirm the room looks clean, smells fresh, and is ready before the next client enters.
Quality check before you finish
- Gloves worn and room ventilated.
- Surfaces cleaned before disinfecting.
- Table, cradle, bolsters disinfected for the full contact time.
- All high-touch points wiped.
- Spills and floor addressed.
- Supplies restocked.
- Waste and used laundry removed.
This is a free, source-anchored standard operating procedure (SOP) you can print and hand to staff. It documents the work sequence for a Day Spa & Massage business — not safety or regulatory rulings, which defer to the cited authorities, the applicable code, and your own health-and-safety plan. Open the tool above to print it, toggle ink-saver, or (with a free ToolFluency Business account) edit it to match your own workflow.
Sources
- CDC β Clean Before Disinfect & Dwell Time (cdc.gov)
- ABMP β Disinfecting the Treatment Room (abmp.com)
About Free Treatment Room & Equipment Sanitation SOP
Free printable SOP for cleaning and disinfecting the spa treatment room between clients: table, face cradle, bolsters, high-touch points, restock and reset.
How to use
- Read the full procedure top to bottom before the work β the SOP runs in order and each step builds on the last.
- Toggle Ink-saver (black & white) for a cheaper mono print for the binder; leave it off for the full-color version.
- Click Print SOP to print or save as PDF. Print one per crew, laminate it for the binder, or attach it to the job in your scheduling system.
- Train new hires on it and have staff sign off. Found something out of date? Use the feedback link β flagged SOPs are re-researched against the source list.
Frequently asked questions
Do I clean or disinfect first?
Clean first to remove oils and debris, then disinfect — soil blocks the disinfectant from reaching germs.
Which surfaces count as high-touch?
Doorknobs, light switches, the stool, side tables, hooks, and anything the client or therapist contacted during the session.
Part of ToolFluencyβs library of free online tools for Printables. No account needed, no data leaves your device.