Cleaning & Disinfection: the full procedure

Clean every surface first, then disinfect with a product proven effective against parvovirus, observing the full label contact time before an animal returns.

What you need

The procedure, step by step

  1. Remove & dispose — Pick up all feces, urine, vomit, food, and soiled bedding daily and between animals — disinfectants do not work over organic matter.
  2. Clean first — Scrub kennels, runs, floors, and bowls with detergent and rinse so visible soil is gone before any disinfectant is applied.
  3. Mix to label spec — Dilute the approved disinfectant to the exact concentration on the label — never eyeball it; the vet/label sets the ratio.
  4. Apply & time the contact — Saturate the surface and start a timer; leave it wet for the full label contact time (parvo-effective products commonly require a 10-minute wet contact time per label).
  5. Rinse, dry & reset — Rinse if the label requires, dry the area, and return clean bowls and laundered bedding before the next animal enters.
  6. Run laundry hot — Wash all bedding and towels separately from other items on a hot cycle and fully dry before reuse.
  7. Handle suspected-illness areas separately — If an animal showed illness, flag the space, use dedicated tools, and follow the vet-directed deep-clean protocol before reuse.
  8. Log it — Record what was cleaned, the product used, and the time so the daily and between-animal cycles are verifiable.

Quality check before you finish

This is a free, source-anchored standard operating procedure (SOP) you can print and hand to staff. It documents the work sequence for a Pet Boarding & Daycare business — not safety or regulatory rulings, which defer to the cited authorities, the applicable code, and your own health-and-safety plan. Open the tool above to print it, toggle ink-saver, or (with a free ToolFluency Business account) edit it to match your own workflow.

Sources

About Free Kennel Cleaning & Disinfection SOP (Printable)

Free printable cleaning & disinfection SOP: clean then disinfect kennels, runs, bowls & laundry against parvo with the proper label contact time.

How to use

  1. Read the full procedure top to bottom before the work — the SOP runs in order and each step builds on the last.
  2. Toggle Ink-saver (black & white) for a cheaper mono print for the binder; leave it off for the full-color version.
  3. Click Print SOP to print or save as PDF. Print one per crew, laminate it for the binder, or attach it to the job in your scheduling system.
  4. Train new hires on it and have staff sign off. Found something out of date? Use the feedback link — flagged SOPs are re-researched against the source list.

Frequently asked questions

Why clean before disinfecting instead of just spraying disinfectant?
Most disinfectants are inactivated by feces, urine, and other organic matter, so a surface must be physically cleaned first or the disinfectant won’t reliably kill parvovirus — confirm products with your veterinarian and the label.
How long should disinfectant stay on the surface?
Always follow the product label’s stated contact time; many parvo-effective products require the surface to stay visibly wet for about 10 minutes. The label and your facility veterinarian set the requirement, not staff judgment.

Part of ToolFluency’s library of free online tools for Printables. No account needed, no data leaves your device.