Rainwater Harvesting Calculator

Parts for collecting rainwater

Links go to Amazon. As an Amazon Associate, ToolFluency earns from qualifying purchases.

Sized for the dry stretch, not the wet month

Every millimetre of rain on every square metre of roof is a litre. The calculator multiplies your roof footprint by the 1991-2020 normal rainfall for the nearest station and by how much of it your roof sheds, then takes off the first flush on each rainy day. Months that average below freezing count nothing: gutters freeze, snow sits on the roof, and outdoor barrels have to be drained.

Storage is the part people get wrong. A 200 L barrel fills from about 2 mm of rain on a 100 m2 roof, so more barrels mostly sit full. What matters is how much you use in the stretch when little rain falls. The calculator runs a normal year month by month, filling the tank, spilling the overflow and drawing what you use, and gives the smallest storage that delivers as much as an endless tank would, in whole barrels, totes or a tank.

Figures we could not confirm

No source gives a freezing cut-off for counting rain, so treating months that average below 0 °C as collecting nothing is our suggestion, on the safe side; snowmelt in a thaw is not counted. The growing season (months averaging 10 °C or warmer), the 3 m overflow hose, the 2 m distance from the foundation and the container sizes are our suggestions. Taking the first flush off every day with rain counts a little more loss than a real diverter, because some rains last more than a day. We did not read CSA B805-ICC 805 itself; it is cited here through the BC Ministry of Health guidance.

Sources

  1. Environment and Climate Change Canada, Canadian Climate Normals 1991-2020: monthly precipitation, daily average temperature and days with 0.2 mm or more, by station.
  2. NOAA NCEI, U.S. Climate Normals 1991-2020, monthly station files: precipitation (inches), average temperature (F), days with 0.01 in or more.
  3. Texas Water Development Board, The Texas Manual on Rainwater Harvesting, third edition (2005): roof footprint, 0.62 gal per sq ft per inch, first flush of at least 10 gal per 1,000 sq ft, tile and shingle losses, screens against mosquitoes.
  4. New Mexico Office of the State Engineer, Roof-Reliant Landscaping, Chapter 7, Table 7-1: runoff coefficients.
  5. Penn State Extension, Rain Barrel Winter Maintenance (updated 2022-12-15): drain and disconnect before the first hard freeze.
  6. BC Ministry of Health, Guidance for Treatment of Rainwater Harvested for Potable Use (version 1.1): disinfection, two treatment methods, CSA B805-ICC 805, Health Canada guidelines.
  7. NCSL, Is Catching Rainwater Legal in Your State? (updated 2025-09-08).
  8. Iowa State University Extension, Watering the Home Vegetable Garden: about 1 inch a week from rain and watering combined.
  9. US EPA WaterSense, How the WaterSense Calculator Works: 5.05 flushes per person a day; gallons per flush.
  10. ENERGY STAR, Clothes Washers: 14 gal a load (ENERGY STAR) and 20 gal (standard).
  11. OMAFRA, Water Requirements of Livestock (2023): litres a day by animal.
  12. Health Canada, Food and drinking water safety in an emergency: 2 L to drink and 2 L for cooking and cleaning a person a day.
  13. Ready.gov, Water: at least 1 gallon a person a day.

All pages read on November 17, 2026. General planning information, not a design for a drinking water system; your building department and local health authority have the final word.

About Rainwater Harvesting Calculator

A 100 m2 metal roof near Ottawa collects about 59,550 L a year (April to November, the months above freezing); June, the wettest month, gives 8,630 L. For a 20 m2 vegetable garden, store 760 L: 4 x 200 L (55 US gal) rain barrels.

By the ToolFluency team · Updated November 2026

Enter your roof footprint, or its length and width, and what it is made of. Pick the nearest place in Canada or the US, or type your own rainfall, and say what the water is for: a garden, toilets and laundry, livestock, or drinking off-grid. You get one answer: how much the roof collects in a year and in the wettest month, and the storage in whole rain barrels, IBC totes or a tank. Under it is a month-by-month chart of what you collect against what you use, every step of the math, and a parts list with Have it and Bought ticks. Rainfall comes from the 1991-2020 climate normals of Environment and Climate Change Canada and NOAA.

How to size a rainwater harvesting system

  1. Enter the roof footprint that drains to your downspouts, measured from above (or type the length and width), and pick the roof material.
  2. Set how many downspouts feed the tank, and leave the first-flush diverter on unless you will not fit one.
  3. Pick the nearest place. Canadian rainfall comes from Environment and Climate Change Canada, US from NOAA; you can type your own yearly total or month by month instead.
  4. Say what the water is for: garden area, people and laundry loads, animals, or people drinking.
  5. Pick where the tank sits (outdoors is drained in winter) and the containers, or let it pick.
  6. Read the answer and the monthly chart, check How we worked this out, then print the parts list.

Rain collected a year off a 100 m2 (1,076 sq ft) metal roof, after the first flush, in the months that average above freezing (1991-2020 normals)

PlaceA yearMonths countedWettest month
Vancouver, BC103,270 L (27,280 gal)all yearNovember, 15,790 L
Calgary, AB32,780 L (8,660 gal)Apr to OctJune, 10,120 L
Toronto, ON56,220 L (14,850 gal)Mar to NovJune, 7,230 L
Ottawa, ON59,550 L (15,730 gal)Apr to NovJune, 8,630 L
Montréal, QC64,270 L (16,980 gal)Apr to NovOctober, 9,240 L
Halifax, NS80,430 L (21,250 gal)Apr to NovNovember, 14,520 L
Chicago, IL72,850 L (19,240 gal)Mar to NovMay, 10,330 L
Seattle, WA88,560 L (23,400 gal)all yearNovember, 14,480 L
Austin, TX82,480 L (21,790 gal)all yearMay, 11,750 L
Phoenix, AZ16,060 L (4,240 gal)all yearAugust, 2,060 L

Examples

Garden near Ottawa, 100 m2 metal roof
A 100 m2 metal roof (runoff 0.95) near Ottawa. The 1991-2020 normals at Ottawa airport give 930 mm of rain and snow water a year, but December to March average below freezing, so only April to November count: 671.3 mm x 100 m2 x 0.95, less the first flush on each rainy day, is about 59,550 L. June is the wettest month, 8,630 L. A 20 m2 vegetable garden needs 25.4 mm a week; in May the normal rain leaves it 754 L short, the biggest gap of the season, so store 760 L: 4 x 200 L rain barrels.
Garden in Phoenix, 1,500 sq ft shingle roof
A 1,500 sq ft asphalt shingle roof (runoff 0.90) in Phoenix. The normals give 7.22 in a year, and no month freezes: about 5,580 gal after the first flush, with August the wettest month (710 gal). A 200 sq ft garden needs about 5,600 gal a year on top of the rain, and almost nothing falls from April to June, so the water has to wait months in the tank: store 1,740 gal, one 2,500 gal tank. Even then the roof covers 99% of the garden in a normal year. Shingle roofs are fine for a garden but not for drinking water (Texas Manual).
Toilets and laundry near Ottawa, tank indoors
The same Ottawa roof flushing toilets and doing laundry for 2 people (1.6 gal toilets, 3 loads a week): 94 L a day, every month. The roof collects plenty from April to November, but nothing in the four freezing months, so a tank indoors or buried below frost has to carry the winter: 14,140 L, one 15,000 L tank.

Frequently asked questions

How much rain can I collect from my roof?

Roof footprint x rain x runoff coefficient: 1 mm of rain on 1 m2 of roof is 1 L (0.62 US gal per sq ft per inch, the Texas Manual on Rainwater Harvesting). A 100 m2 metal roof near Toronto collects about 56,220 L in the months that average above freezing, after the first flush. Use the footprint seen from above, not the length of the slope.

How many rain barrels do I need?

Enough to carry your use through the driest stretch, not to catch every storm. For a 20 m2 vegetable garden near Ottawa watered off a 100 m2 metal roof, the biggest shortfall is in May, 754 L, so 4 x 200 L (55 US gal) barrels. A barrel fills from a few millimetres of rain, so more barrels mostly sit full.

What runoff coefficient should I use for my roof?

Metal 0.95, asphalt shingle 0.90, concrete or clay tile 0.90, and tar and gravel 0.80 to 0.85 (New Mexico Office of the State Engineer, Roof-Reliant Landscaping, Table 7-1; the Texas Manual puts tile and shingle losses at about 10%). The calculator uses 0.80 for tar and gravel, the safe side.

How big should a first-flush diverter be?

The Texas Manual's rule of thumb is at least 10 US gal for every 1,000 sq ft of roof that drains to it, about 0.41 mm of rain. The parts list sizes one per downspout from your roof area.

Can I collect rainwater in winter in Canada?

Not in outdoor barrels. Penn State Extension says to empty and unhook them before the first hard freeze, because ice can crack a plastic barrel. The calculator counts nothing in months that average below 0 C; a tank indoors or buried below the frost line can carry stored water through winter.

Is rainwater safe to drink?

Not without treatment. Roof water picks up bird droppings, dust and whatever the roof is made of. BC's Ministry of Health treats harvested rainwater like surface water: it must be disinfected, with two kinds of treatment and no detectable E. coli, following CSA B805-ICC 805 and Health Canada's drinking water guidelines. Test it regularly. Asphalt shingle roofs are not for drinking water.

Is it legal to collect rainwater?

In most places, yes. NCSL counts Colorado and 18 other US states that set limits on who can collect rainwater and how it can be used, so check your state. In Canada, plumbing rainwater into a building falls under the building code and local bylaws.
Disclaimer: General planning from Environment and Climate Change Canada and NOAA climate normals (1991-2020), the Texas Manual on Rainwater Harvesting, New Mexico's Office of the State Engineer, Penn State Extension, Iowa State Extension, EPA WaterSense, ENERGY STAR, OMAFRA, Health Canada, Ready.gov, the BC Ministry of Health and NCSL, read on 2026-11-17. Rainfall normals are 30-year averages; a dry year gives less. Rainwater for drinking needs proper filtration, disinfection and testing.

Part of ToolFluency’s library of free online tools for Survival & Off-Grid. No account needed, no data leaves your device.

Embed this tool on your site (free)
Paste this where you want the tool. Please keep the attribution link.
<iframe id="tf-rainwater-harvesting-calculator" src="https://toolfluency.com/tools-v2/survival/rainwater-harvesting-calculator.html?embed=1" width="100%" height="640" loading="lazy" style="border:1px solid #e2e2e2;border-radius:12px;max-width:760px" title="Rainwater Harvesting Calculator by ToolFluency"></iframe>
<script>addEventListener("message",function(e){var f=document.getElementById("tf-rainwater-harvesting-calculator");if(f&&e.source===f.contentWindow&&e.data&&e.data.tfEmbedHeight){f.height=e.data.tfEmbedHeight}});</script>
<p>Powered by <a href="https://toolfluency.com/tools-v2/survival/rainwater-harvesting-calculator.html">Rainwater Harvesting Calculator</a> — free tools by ToolFluency</p>